Monitoring

You can use the menu item Monitoring to create modules that contain different types of switches. Switches can display the status of a device or control it at the touch of a screen button. 
 
 Plus icon for modules 
 To create a new module: 
 
 Press the plus icon.  
 Then select a Site for the module. Modules are only visible for the current site. 
 Enter a meaningful Name .  
 Press Save . 
 
 Plus icon for switches 
 To create a new switch for a module: 
 
 Press the plus icon within the module. 
 Select the type of switch you want to create ( Status , Control , Hybrid ). 
 Enter a meaningful name. 
 Select the device that is to be mapped by the switch and define the required settings. 
 
 Switch types 
 Status 
 A switch of the type Status can represent up to four different states of the device in question. 
 
 Offset : Select the position in the booking record that is to be checked for the status. 
 Event Type: Select the booking type that is to define the status. 
 StatusA to StatusD: Enter the required value for each status. You can use the Upload buttons to store a separate image for each status. 
 
 Press Save to apply the changes. 
 Control 
 A Control switch allows you to control a device. 
 
 BPA9: Enter the data that should be sent to the device when the switch is pressed. 
 Buttons Upload : Upload a suitable image for the switch. 
 
 Press Save to apply the changes. 
 Hybrid 
 A Hybrid switch can both control and display up to four statuses. 
 
 BPA9: Enter the data that should be sent to the device when the switch is pressed. 
 Offset : Select the position in the booking record that is to be checked for the status. 
 Event Type: Select the booking type that is to define the status. 
 StatusA to StatusD: Enter the required value for each status. You can use the Upload buttons to store a separate image for each status. 
 
 Press Save to apply the changes. 
 Delete or change a module/switch 
 Right-click on a switch or in a module and select Remove or Edit .